【软管泵-路沿石成型机服务周到】

软管泵用途非常广泛，市面上的诸多场合均可适用，如：污水泵井事故清空，污水泵站事故抽空，水厂的污水池、污泥池清空。市政下水道系统的污水、污泥清空抽排。工厂、罐车事故后的油品、液体物质、化学污泥等的紧急转移；事故后地表冲洗水抽吸泵。消防应急水转移；紧急供水泵站，泵内部过流部件都可配备不锈钢，数台泵车串联使用可作为临时供水泵站。军队、海军部队战备后勤泵车。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 

软管泵维护
 1、软管的更换与调整
（1）更换软管时，先将两端管卡螺栓松掉，并将管卡拆下，再将其中一端的吊圈螺栓松掉，将一端短管从胶管中抽出，点动电机将胶管自泵内推出；然后将新的软管从拆下短管的一端插入泵壳与压辊之间，点动电机，将软管装入；再将吊圈固定、管卡装上，至此更换任务完成。尤其注意再安装软管时，务必将软管与泵壳贴紧，确认后方能投入正常运行。
（2）软管使用200小时左右，可将软管转动90度，对单管软管泵除转动方向外，还可前后抽动软管，以改变软管的压点，延长软管的使用寿命。